Color of surface
Stainless steel inside & pp outside
Size of power cord
Further information for our electric water kettle
Stainless steel body
SS#201 or SS#304
cordless stainless steel electric kettle
Kettle body can be rotated
Leifan KSD-368B controller
Leifan KSD-368-2 couple
SS concealed heating element
Automatically cut-off power after boiling
With indicator light on Switch when working
Filter on spout
Power cord length
Water level on inside body
Anti-slip feet design
- Our product shall be packed with plastic bag and cardboard,then
pack it into a gift box according to normal packing method.
- Unless otherwise specified,all of our products must pass the drop
test conducted by our company.
- The packaging detail shall be referred to Packing Directive.
Black words with silver back ground,words can’t be rubbed by water
105G coated paper, A5 size, black-white printing.
3-ply board and four color printing.
5-ply kraft board and black printing.
Plugs for your reference
Plugs are available for different market
Specific detail about electric water kettle
Heating tube and leifan controller on the bottom of glass kettle
1.circle heating tube around the kettle on the bottom
2.With double metal on controller for safe use
3.Water could be boiled up in 5 minutes with sensitive controller
4.Strix controller,sunlight controller and our own brand controller
can be choose according to your require.
Steam switch and connector on the left side for your reference
1.steam switch will automatically turns off when water boiled up
2.High quality connector on working base
Production Line Qty
2 production lines
Leifan electric appliance factory is focus on developing and
selling all kinds of kettles from 2010,
such as stainless steel kettle,stainless steel keep warm
kettle,glass kettle with single wall and double wall,plastic
below is our another factory located in Huizhou,Guangdong,which is
also focus on kettles for many years.
the following factory we are going to introduce is controller
factory of leifan,
it's focus on developing controller with many years experience,
Our controllers include
- double-metal waterproof controller
- double-metal non-water-tight controller
- single-metal non-water-tight controller
- All plastic parts shall be bright and free of defects such as
impurity, sharp edge, flow mark, shrinkage, missing, flash, scratch
and whitening etc.
- The unit colors must be consistent or per the sample or customer’s
requirement. (in 0.5m natural ray)
- The heating plate shall be high grind-finished and free of scratch
and rust etc.
- Mating surface shall maintain consistency of fit along adjoining
surfaces and free of looseness and deformation. For the length of
fit, gap shall be less than 0.8mm, warpage shall be less than
1.0mm, and displacement shall be less than 0.7mm.
- All printings shall be clear, legible, complete, secure and in
- The unit is operated at rated voltage in normal condition and the
wattage shall be measured within +5%-10% of rated wattage.
- The unit shall be capable of withstanding the 1000V hi-pot test for
a period of 2S.
- The unit must pass the DC12V/25A ground resistance test between the
grounding metal surfaces of the plug. The resistance measured shall
not exceed 0.1Ω.
- Run the unit at 1.15 times the rated power. After stabilization,
conduct the current leakage test on the unit and it shall not
The unit must be capable of withstanding the life test without
mechanical or electrical breakdown.
The test detail shall be referred to the Operation Directive from
the Quality Assurance Test Center.
Strength test for welding Controller
Press less than 80N power with 90º for Welding position(as below
Sample(Free of Charge)
1-5 PCS free samples,5-7 working days
20-30days upon receipt of your payment,and all artworks
LC at sight;
TT 30% deposit and balance 70% against BL copy.
By sea/airfreight, provide safe delivery for every shipment.
2 years warranty
Each product will be 100% full inspection before shipment.
All problems you submit will be replied within 24hours
OEM design,OEM color,OEM packing,ODM are highly welcome.
Website in several languages:
If you want to know more our other electric kettle information,
please click below link.
Phoebe (Marketing Manager)
Direct Line: 86 757 23619655
Cell: 86 13928298517